31
Technical Information
Service Manual
6. Function and Control
6.1 Introduction of control panel
GPC07AH-K3NNC3D, GPC08AH-K3NNC4A,
GPC07AH-K3NNC4B, GPC08AH-K3NNC4B,
GPC07AH-K3NNC4D, GPC08AH-K3NNC3D,
GPC08AH-K3NNC4D, GPC09AH-K3NNC3D,
GPC08AH-K3NNC5A, GPC07AH-K3NNC5B,
GPC08AH-K3NNC5B, GPC08AH-K3NNC5C,
GPC09AH-K3NNC5A, GPC09AH-K3NNC5C,
GPC07AH-K3NNC5D, GPC08AH-K3NNC5D,
GPC09AH-K3NNC5D,
Note:
● After putting through the power, air conditioner will give out a sound. After that, you can operate the air condition by pressing
buttons on control panel.
● Under ON status, after each pressing of button on control panel, air conditioner will give out a sound. Meanwhile, corresponding
function indicator on control panel will ON.
● Under ON status, dual-8 nixie tube on control panel displays set temperature value during cooling operation, while it won’t display
under other modes.
● Under OFF status, dual-8 nixie tube on control panel won’t display.
1. ON/OFF button
Press this button to turn on or turn off air conditioner.
2. MODE button
Press this button to select your required operation mode. Corresponding mode indicator is ON.
COOL: Under this mode, air conditioner operates under cooling mode. Press “Fan Speed” button to adjust fan speed. Cooling
indicator is ON. Corresponding speed indicator is ON and dual-8 nixie tube displays set temperature. Temperature setting range is
16
℃
~30
℃
.
DRY: Under this mode, air conditioner operates at low speed. Drying indicator and low speed indicator is ON. Fan speed can’t be
adjusted. Dual-8 nixie tube won’t display.
FAN: Under this mode, air conditioner operates at set fan speed. Fan indicator and corresponding speed indicator is ON. Dual-8
nixie tube won’t display.(Note: You must connect the heat-discharge pipe before operating cooling or drying mode. No need for only
fan mode.)
3. “+”, “-” button
Under cooling mode, press “-” or “+” button to decrease or increase set temperature 1
℃
. Set temperature range is 16
℃
~30
℃
.This
button is invalid under auto, dry or fan mode.
4. FAN SPEED button
Press this button to select your required fan speed. Corresponding speed indicator is ON. (This button invalid under drying mode)
Button function introduction ==
Cool
Dry
Fan
low medium high auto
ON/OFF button
MODE button
+ / - button
fan mode indicator
dry mode indicator
cool mode indicator
signal receiving window
dual-8 nixie tube
water full indicator
ON/OFF button
MODE button
+ / - button
fan mode indicator
dry mode indicator
cool mode indicator
signal receiving window
dual-8 nixie tube
water full indicator
