Gree GMV-ND224PH/A-T, Руководство пользователя

Страница: 19 / 25

Multi Variable Air Conditioners Ducted Type Indoor Unit
15
(2) The connection of stranded wire (as shown in Fig.5.1.2)
1) Strip about 10mm insulation of the end of stranded wire by stripping and cutting tool.
2) Loosen the wiring screws on terminal board.
3) Insert the wire into the ring tongue terminal and tighten by crimping tool.
4) Use the screwdriver for tightening the terminal.
Unit: mm
Fig.5.1.1 Fig.5.1.2
5.2 Power Cord Connection
NOTES!
①
Every unit should be equipped with a circuit breaker for short-circuit and overload protection.
②
During operation, all indoor units connected to the same outdoor unit system must be kept
energized status. Otherwise, the unit can’t operate normally.
Fig.5.2.1
(1) Detach the electric box lid.
(2) Let the power cord pass through the wiring through-holes.
(3) Connect wires according to Fig. 5.2.1