11
© Copyright, GREE Canada, 2021
© Copyright, GREE Canada, 2021
Introduction of remote controller
1
ON/OFF button ( )
2
MODE button ( )
3
4
FAN button ( )
5
I FEEL button ( )
6
SLEEP button ( )
Button
-
/
+
7
TIMER button ( )
2
3
5
7
6
4
3
1
1
2
ON/OFF button:
Press this button to turn on the unit,turning on the unit with remote controller, the unit
will operate in energy-saving mode. Press this button again to turn off the unit.
Note
: If energize the unit, turn it on, turn it off and then turn it on, the unit will operate
in energy-saving mode; if the unit is energized after power failure, the unit will still
operate according to the status before power failure. Under off status, the complete
unit doesn’t respond to turning on the unit with remote controller under any mode
other than energy-saving mode. In this case, the buzzer will give out two sounds for
error indication. You need to turn off the unit and then turn it on with remote controller
or switch to energy-saving mode after turning on the unit with remote controller.
MODE button:
Each time you press the button, a mode is selected in a sequence that goes from
AUTO, COOL, SAVE, FAN and DRY, as the following:
Note :
This is a general use remote controller, it could be used for the air conditioners with
multifunction. For some function, which the model dosen’t have, if press the corresponding
button on the remote controller that the unit will keep the original running status.
AUTO
COOL
FAN
DRY
SAVE
3
Button
▲
/
▼
:
Pressing
▲
or
▼
button once will increase or decrease set temperature by 1°F(°C).
Hold
▲
or
▼
button for 2s, set temperature on remote controller will change quickly.
Release the button after your required set temperature is reached.
Under timer setting status, after each pressing of
▲
or
▼
button, time will increase
or decrease by 0.5h. Hold
▲
or
▼
button, 2s later, time displayed on dual-8 nixie tube
will change quickly. Loosen the button until the time is reached to your set time.
