Gree CF01000730, Руководство по обслуживанию

Страница: 18 / 129

GREE Duct type split Air conditioner Inverter Series
16
3.4 Software introduction
(1) One-button commissioning
Personnel responsible for the commissioning of air conditioners can start commissioning by pressing
one button according to the commissioning logic of software, which will give the commissioning order to
units. Then commissioning will be started up automatically step by step. During the commissioning, the
corresponding process will be ticked in green on the software interface. If any commissioning process is
not normal, it will be displayed in red.
(2) Comprehensive monitoring
The software can monitor every part of the air conditioning system, including functions, equipment
and components operating status. The monitoring results will be displayed in text or curve so that user
can acquire the operating status of the entire system conveniently and straightforwardly.
(3) Real-time control
Air conditioner’s operating time and requirements may be different based on areas and functions.
User can set units’ parameters on computer according to actual needs, such as the on/off, temperature,
fan speed, mode, etc. Meanwhile, the software can also set or view the function parameters of outdoor
units, gateway and other equipment. In this way, the mangement of central air conditioners is realized.
(4) Replay history
Software can replay and save the historical monitoring information in the data base. The replay speed
can be selected and the information will be shown in text or curve. This function has greatly saved the
time to track problem cause and resolved the difficulty of problem reproduction.
(5) Applicable to multiple series, models and users
Gree Commissioning Tool Kits is applicable to air conditioning system that comsists of multiple series
and models. Later, it will be developed to cover all series of Gree central air conditioners, such as multi
VRF, centrifugal chiller, screw type chiller, ground source heat pump units, modular units, fan coiled units,
close control units, etc. It can be used by system and controller designers to develop and monitor units,
or used for maintenance and commissioning.
(6) Other functions
For the convenience of users, the software has added functions like connection guide, printing screen,
opening database folder, rebuilding database, changing database saving path, etc.