3
PROTECT YOUR MODEL, YOURSELF
& OTHERS… FOLLOW THESE
IMPORTANT SAFETY PRECAUTIONS
1 . Your Zlin 526 Akrobat should not be considered a toy, but
rather a sophisticated, working model that functions very
much like a full-size airplane . Because of its performance
capabilities, the Zlin 526 Akrobat, if not assembled and
operated correctly, could possibly cause injury to yourself or
spectators and damage to property .
2 . You must assemble the model
according to the
instructions . Do not alter or modify the model, as doing so
may result in an unsafe or unflyable model . In a few cases
the instructions may differ slightly from the photos . In those
instances the written instructions should be considered as
correct .
3 . You must take time to
build straight, true and strong .
4 . You must use an R/C radio system that is in good condition,
a correctly sized engine or motor, and other components as
specified in this instruction manual . All components must be
correctly installed so that the model operates correctly on
the ground and in the air . You must check the operation of the
model and all components before
every flight .
5 . If you are not an experienced pilot or have not flown
this type of model before, we recommend that you get the
assistance of an experienced pilot in your R/C club for
your first flights . If you’re not a member of a club, your local
hobby shop has information about clubs in your area whose
membership includes experienced pilots .
6 . While this ARF has been flight tested to exceed normal use,
if the plane will be used for extremely high stress flying, such
as racing, or if an engine larger than one in the recommended
range is used, the modeler is responsible for taking steps to
reinforce the high stress points and/or substituting hardware
more suitable for the increased stress .
7 .
WARNING: The cowl is made of fiberglass, the fibers of
which may cause eye, skin and respiratory tract irritation .
Never blow into or on a part to remove fiberglass dust, as
the dust will blow back into your eyes . Always wear safety
goggles, a particle mask and rubber gloves when grinding,
drilling and sanding fiberglass parts . Vacuum the parts and
the work area thoroughly after working with fiberglass parts .
We, as the kit manufacturer, provide you with a top quality,
thoroughly tested kit and instructions, but ultimately the
quality and flyability of your finished model depends
on how you build it; therefore, we cannot in any way
guarantee the performance of your completed model,
and no representations are expressed or implied as to
the performance or safety of your completed model .
Remember: Take your time and follow the instructions to
end up with a well-built model that is straight and true.
LITHIUM BATTERY
HANDLING & USAGE
WARNING!! Read the entire instruction sheet included with
the battery . Failure to follow all instructions could cause
permanent damage to the battery and its surroundings, and
cause bodily harm!
•
ONLY use a LiPo approved charger .
•
NEVER charge in excess of 4 .20V per cell .
•
ONLY charge through the “charge” lead . NEVER
charge through the “discharge” lead .
•
NEVER charge at currents greater than 1C .
•
ALWAYS set charger’s output volts to match
battery volts .
•
ALWAYS charge in a fireproof location .
•
NEVER trickle charge .
•
NEVER allow battery temperature to exceed 150°
F (65° C) .
•
NEVER disassemble or modify pack wiring in any
way or puncture cells .
•
NEVER discharge below 3 .0V per cell
•
NEVER place on combustible materials or leave
unattended during charge or discharge .
•
ALWAYS KEEP OUT OF REACH OF CHILDREN .
DECISIONS YOU MUST MAKE
This is a partial list of items required to finish the Zlin
526 Akrobat that may require planning or decision
making before starting to build . Order numbers are
provided in parentheses .
Glow Engine Option & Required Parts
If you choose to equip your model with a glow engine, you
will need to purchase the items listed below . Either a two-
stroke or a four-stroke engine can be used . The glow engine
is mounted inverted .
o
3' [900mm] standard silicone fuel tubing
(GPMQ4131)
o
a suitable propeller per engine manufacturer’s
recommendation
o
O .S .
®
Needle Valve Extension kit (optional)
(OSMG7290)
Содержание Z-526 ZLIN krobat
Страница 40: ......
