manualshive.com logo in svg

GREAT PLAINS LC25, Руководство оператора, Страница: 8 / 62

Поделиться
Скачать
GREAT PLAINS LC25 Скачать руководство пользователя страница 8

2018-08-15

Table of Contents

Index

591-049M

LC25/40

Table of Contents

Index

Important Safety Information

4

Safety At All Times

Thoroughly read and understand the instructions in this
manual before operation. Read all instructions noted on
the safety decals.

Be familiar with all implement functions.

Operate machinery from the driver’s seat only.

Do not leave implement unattended with tractor engine
running.

Do not dismount a moving tractor. Dismounting a moving
tractor could cause serious injury or death.

Do not stand between the tractor and implement during
hitching.

Keep hands, feet and clothing away from moving parts.

Watch out for wires, trees, etc., when folding and raising
implement. Make sure all persons are clear of working
area.

Safety Decals

Safety Reflectors and Decals

Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement. 

Read and follow decal directions.

Keep lights in operating condition.

Keep all safety decals clean and legible.

Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.

When ordering new parts or components, also request
corresponding safety decals. 

Slow Moving Vehicle Reflector

818-055C

On center rear face of center frame tie tube;
1 total

To install new decals:

1.

Clean the area on which the decal is to be placed.

2.

Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.

34856

Содержание LC25































































Отзывы:

Нет отзывов