GREAT PLAINS LC25, Руководство оператора, Страница: 19 / 62

LC25/40 Table of Contents Index Preparation and Setup 15
2018-08-15 Table of Contents Index 591-049M
Check/Change Hitch Configuration 2014+
These instructions apply to: LC25 models and LC40
models manufactured in 2014 or later.
Choose a hitch option compatible with the tractor 3-point.
The LC25/40 has three ASABE S217 / ISO 730-1 hitch
configurations:
Category 3N (narrow, 80 to 225 hp / 60 to 168 kW)
Category 3W (wide, 80 to 225 hp / 60 to 168 kW)
Category 4 (N or W, 180 to 400 hp / 135 to 300 kW)
Changing between categories requires exchanging pins
and bushings at the implement hitch.
2014+ Top Link
Refer to Figure 4
For all hitch categories , this pin:
805-291C PIN CLVS 1.75X4.38 USBL
is left in place in the top front center holes.
For Category 4 , move (as needed) this pin:
805-119C PIN HTCH 1.25X4.50 USBL
to the top rear center holes.
For Category 3 , move (as needed) this pin:
805-119C PIN HTCH 1.25X4.50 USBL
to the front mid center holes.
2014+ Lower Links
Refer to Figure 5
To change the lower links, remove all pins, bushings and
spacers at the bottom front 2-point locations.
For Category 3N , relocate:
591-031H CAT 3 WIDE BUSHING WELDMENT
to the inside face of the inside plates of the bottom front
2-point holes. Relocate
591-057H CAT 3 HITCH PIN SUPPORT SPACER
to the inside face of the outside plates of the bottom front
2-point holes. Secure each
with 2 bolts. Relocate
805-518C PIN HTCH 1.44X8.88 USBL
to the bottom front 2-point holes. Store the removed
parts in the lower rear holes.
For Category 3W , relocate:
591-031H CAT 3 WIDE BUSHING WELDMENT
to the outside face of the outside plates of the bottom
front 2-point holes. Relocate
591-057H CAT 3 HITCH PIN SUPPORT SPACER
to the outside face of the inside plates of the bottom front
2-point holes. Secure each
with 2 bolts. Relocate
805-518C PIN HTCH 1.44X8.88 USBL
to the bottom front 2-point holes. Store any removed
Category 4 parts in the lower rear holes.
For Category 4 , relocate the following parts from the
rear storage holes to the bottom front 2-point holes:
591-032H PIN HITCH 2 X 12 7/8 PLT
591-058H CAT 4N LOWER HITCH PIN SPACER
Store the removed Cat 3 parts in the lower rear holes.
42
Figure 4 Side View
2014+ Category 3 & 4 Top Link
591-007A
38
38
42
Category 3 Category 4
42
Figure 5 Bottom View
2014+ Category 3 & 4 Lower Links
591-007A
Category 3N
14
16 43
Category 4
15
17
Category 3W
14
16
43
38
38
14
16
16
43
14
16
16
43
15
17