manualshive.com logo in svg

GREAT PLAINS LC25, Руководство оператора, Страница: 6 / 62

Поделиться
Скачать
GREAT PLAINS LC25 Скачать руководство пользователя страница 6

2018-08-15

Table of Contents

Index

591-049M

LC25/40

Table of Contents

Index

Important Safety Information

2

Avoid High Pressure Fluids

Escaping fluid under pressure can penetrate the skin,
causing serious injury.

Avoid the hazard by relieving pressure before
disconnecting hydraulic lines.

Use a piece of paper or cardboard, NOT BODY PARTS, to
check for suspected leaks.

Wear protective gloves and safety glasses or goggles when
working with hydraulic systems.

If an accident occurs, seek immediate medical assistance
from a physician familiar with this type of injury.

Use Safety Lights and Devices

Slow-moving tractors and towed implements can create
a hazard when driven on public roads. They are difficult
to see, especially at night.

Use flashing warning lights and turn signals whenever
driving on public roads. 

Use lights and devices provided with implement.

Keep Riders Off Machinery

Riders obstruct the operator’s view. Riders could be
struck by foreign objects or thrown from the machine.

Never allow children to operate equipment.

Keep all bystanders away from machine during operation.

Transport Machinery Safely

Maximum transport speed for implement is 20 mph
(32 km/h). Some rough terrains require a slower speed.
Sudden braking can cause a towed load to swerve and
upset. 

Do not exceed 20 mph (32 km/h). Never travel at a speed
which does not allow adequate control of steering and
stopping. Reduce speed if towed load is not equipped with
brakes.

Comply with state and local laws.

Do not tow an implement unless the towing vehicle is
rated for, and ballasted for, the weight of the implement.

Carry reflectors or flags to mark implement in case of
breakdown on the road.

Do not fold or unfold the implement while the tractor is
moving.

Содержание LC25































































Отзывы:

Нет отзывов