5
Assembly:
Desk with Drawer
STEP 3:
Lay the drawer box on a clean flat surface (preferably
carpet) and insert the drawer base panel (F) into the
grooves on the inside of the drawer surround.
Ensure it is pushed firmly into the drawer back panel (D).
Insert 2 x cam locks (#2) into the large drill holes on the
inside of the drawer box. They are positioned at the open
end of the side panels (E).
Hardware for Step 3:
2x
#2 Cam Locks
Ensure that each cam locks arrow is
pointing towards the drill hole on the side
edge of the component.
F
C
#1
#1
#5
D
#2
STEP 4:
Take the drawer front panel
(C) and insert a cam dowel
(#1) into each end of the
panel.
Using 1 x 30mm screw (#5),
attach the handle (#11) to
the drawer front panel (C).
Hardware for Step 4:
1x
#5 30mmL Screw
1x
#11 Drawer Handle
2x
#1 Cam Dowels
#11
