11
STEP 5:
Take the divider panel (J) and insert 2 x cam dowels
(#1) into the outer drill holes and 2 x wooden
dowels (#3) into the inner drill holes as shown
above.
Then insert 2 x cam locks (#2) into the large drill
holes at the top of the panel. The arrows on the
cam locks should be pointing towards the inner drill
holes.
Push the panel J onto the fixings and lock into place
by turning both cam locks at the top of the divider
panel clockwise.
STEP 6:
Take the shelf panel (K) and insert 4 x
cam locks (#2) into the drill holes as
shown. The arrows need to be facing
towards the shorter edges of the panel/
inner drill holes.
Insert the shelf panel (K) onto the
hardware on divider panel (J) and lock
the 2 x cam locks circled by turning
clockwise.
Assembly:
Hutch
Hardware for Step 5:
2x
#3 Wooden Dowels
2x
#1 Cam Dowels
2x
#2 Cam Locks
J
L
#2
#2
When in position, turn the
cam locks (#2) clockwise to lock
in place.
When in position, turn the
cam locks (#2) clockwise to lock
in place.
#3
#1
Hardware for Step 6:
4x
#2 Cam Locks
J
K
K
