Great Little Trading Whittington Desk & Hutch Скачать руководство пользователя страница 2

2

Safety Warnings:

• 

Adult assembly required.

• 

Unassembled product contains small parts which may present a 
choking hazard. 

• 

Children should be kept away from the product during assembly to 
avoid any possible risk of injury.

• 

Assemble and use on a flat and level surface. 

• 

DO NOT use power tools in the assembly of this product as there is a 
risk of over-tightening and consequently splitting of the wood.

• 

Check all fixtures and fittings regularly and tighten as necessary.

• 

Please retain these instructions for future reference.

Customer Service:

• 

If you find that any components are missing or damaged, please do 

not begin assembly and do not use the item. Please contact GLTC 
Customer Services on 

0344 848 6000

 immediately.

Product Care:

• 

Wipe clean using a soft damp cloth followed by a dry cloth.

• 

The painted/lacquered surface is resistant to staining if cleaned 
immediately, however please protect the surface from contact with 
ball point pen and indelible style felt markers as the ink is by nature 
permanent. 

• 

Do NOT use cleaning products which contain ammonia, solvents or 
abrasive material.

• 

Do NOT expose the item to extremes of heat and humidity.

Could we do better?

 

If there is anything you think could be improved in these instructions or in 
the assembly of this product we’d be grateful if you could let us know; we’ll 
pass any helpful hints and tips on to other customers via our website and 
update the instructions. 
All you need to do is drop us a line at 

[email protected] 

Thank you

Содержание Whittington Desk & Hutch















Отзывы: