10
STEP 3:
Take the top shelf panel (L) and insert 2 x cam
dowels (#1) and 2 x wooden dowels (#3) into the
drill holes as shown above.
Insert 4 x cam locks (#2) into the large drill holes in
each corner of the panel.
The arrows on the cam locks need to be facing
toward the shorter ends of the panels.
STEP 4:
Take the top shelf panel
(L) and position over the
remaining fixings on the left
side panel (H). The hardware
on the top shelf panel (L) must
be facing inside.
Push the panel into position
and lock the 2 x cam locks
(#2) circled by turning
clockwise.
Assembly:
Hutch
Hardware for Step 3:
2x
#3 Wooden Dowels
2x
#1 Cam Dowels
4x
#2 Cam Locks
L
L
H
#2
#2
Ensure that each cam locks arrow is
pointing towards the drill hole on the side
edge of the component.
#1
#3
When in position, turn the
cam locks (#2) clockwise to lock
in place.
