Great Little Trading Whittington Desk & Hutch Скачать руководство пользователя страница 1

1

A few important pointers before you start:

• 

Please read the instructions right through before you start, and check that all the 

components have been included in the pack; we find separating all the hardware 

into piles makes it easier to be sure that everything is present and correct.

• 

Make sure you have the right tools. Allen keys are provided if required, but screw 

drivers and other tools are not. You’ll find details of the tools you need at the 

beginning of the instructions.

• 

It’s a good idea to build the unit in the room where you are going to be using it, to 
avoid the need to move it after it’s been assembled. 

• 

Do not throw away any packing materials until assembly is complete, just in case 
you accidentally discard smaller parts and hardware. 

easy - 

medium

 - hard

two-person job

09/02/2017

Assembly Difficulty

Thank you for shopping with GLTC, we hope you enjoy having this 
product in your home.  

We know assembling furniture, toys or accessories is not everyone’s favourite 
way to spend their time, so we’ve tried to make assembling this item as quick and 
painless as possible. 

Hopefully our efforts will have been worthwhile and you’ll sail through the 
whole process. But if it all feels a bit too much like hard work, then we do have 
an assembly company we can recommend: the Flatpack Construction Company 
offers a nationwide service and can be contacted on 

0843 289 4951 or www.

flatpackconstruction.co.uk.

V3

Whittington Desk & Hutch

www.gltc.co.uk

Содержание Whittington Desk & Hutch















Отзывы: