3
INSTALLATION
Receiving and Unpacking
Inspect and report any damage before receiving. Unpack the wall
mount by carefully removing the corrugated carton and corners.
Avoid damaging the wall mount when removing packaging.
WARNING:
Only trained service personnel should be used to unpack
and move the wall mount. Also, be sure you have a sufficient number
of service personnel. Do not attempt to move wall mount by yourself.
MOUNTING INSTRUCTIONS
Wood Studded Wall
Once the location on the wall has been determined, inspect the wall
surface. The wall must be flat and square in the horizontal and vertical
plane to ensure the Great Lakes wall mount closes correctly. If the wall
is not flat and square, the use of shims may be required.
Wood studded wall mounting instructions apply to a 2" x 4" wood stud
wall with 3/4" plywood.
Recommended Mounting Hardware for Wood Studded Wall
For WM, WE, and 15WM Series:
Qty. (4) 3/8 x 2" long Lag Bolts and 1" O.D. Flat Washer
For WMCM, WDX, WLP and NEMA 12K Series:
Qty. (4) 3/8 x 2 1/2" long Lag Bolts and 1" O.D. Flat Washer
Masonry Wall Surface
For masonry wall surface, the installer must provide all the appropriate
hardware.
PROTECTIVE GROUNDING
Protective grounding studs are provided along with grounding jumper
wires that electrically bond the wall mount door to the wall mount
frame.
