21
C
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A
A
B
B
C
C
D
D
WLP WALL MOUNT - FIELD REVERSIBLE DOOR
Before removing the door, pull apart the quick disconnect grounding
wires. To remove the door, have one person remove the screws while
the other person holds the door for removal.
1.
Open the door.
2.
Remove the bottom male hinge off the wall mount. The hinge is
secured with (2) #10-32 screws and (2) external tooth washers
located on the inside of the wall mount.
3.
Carefully lift the door upward and pull away from the wall mount.
4.
Remove the top male hinge off the wall mount. The hinge is secured
with (2) #10-32 screws and (2) external tooth washers located on
the inside of the wall mount. (Note: For 48"H wall mount, repeat this
step to remove middle hinge)
5.
Install the top male hinge onto the left side of wall mount and
secure with (2) #10-32 screws and (2) external tooth washers.
Make sure the hinge pin is positioned upward.
6.
Attach the door by aligning top hinge of the door to its respective
hinge pin on the wall mount and slowly slide the door down until
seated.
7.
Insert bottom hinge pin into bottom hinge on the door and secure
to the wall mount with (2) #10-32 screws and (2) external tooth
washers. (Note: For 48"H wall mount, repeat this step to install the
middle hinge)
Wall Mount
#10-32 Screw
Reversible
Hinge
(female)
Door
#10 Ext. Tooth
Washer
#10-32 Screw
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A
A
B
B
C
C
D
D
Reversible
Hinge
(male)
#10 Ext.
Tooth Washer
