14
WD SERIES WALL MOUNT
1. Mounting holes are designed for 3/8" hardware, 16.00" on center.
2. (Optional) For the ease of installation, mount only rear section to the wall first.
Remove the hinge pins to detach the center swing section (see Detail A ). After
mounting rear section to the wall, reassemble center swing section and secure
it with hinge pins.
3. WD handles can be found in the hardware bag.
Rear section
Side ventilation
Front door with
keyed lock
Center swing section
19" EIA mounting rails;
2 pairs, tapped #12-24
24.00
RMU
HEIGHT
18.31 C-to-C
1", 2",3" and 4"
nominal
concentric
conduit
knockouts
1/2 -13 threaded holes
TYP
(5) places
5.0
6.0
6.0
TOP/BOTTOM VIEW
FRONT VIEW WITHOUT DOOR
1", 2",3" and 4"
nominal
concentric
conduit
knockouts
(7217WS)
Provision
for
optional
2 fan
assembly
(7217WS)
Provision for optional
2 fan assembly
Draw Latch
Draw Latch
Mounting holes
