27
CAUTION
Be careful while removing the backing on the gasket material. The
material may stretch and the holes will not align.
NOTE:
If the wall mount is not air tight, or the air conditioning system
operates with the wall mount door(s) open, moisture will condensate inside
the air conditioning system and may cause the condensate management
system to overflow.
3.
After the gasket material has been installed, mount the IceQube
system onto the wall mount and fasten it using the supplied nuts and
bolts. Check to see if the power cord and all optional cables are in
place. Fasteners need to be tightened securely and the gasket material
needs to be in place in order to maintain wall mount integrity. The
gasket material should be slightly compressed with no visible gaps. The
IceQube system is now ready to begin operation.
NOTE:
Near the bottom or on the side of the IceQube system cabinet is
a nipple for condensate overflow. Although all vertical or side mounted
IceQube air conditioners have built in condensate management systems,
it may be necessary to attach a drain hose to this nipple on wall mount
which are located in extremely humid conditions, or where wall mount
doors are left open or the door seals are leaking.
NEMA 12K WALL MOUNT WITH
OPTIONAL AC UNITS
PREPARING THE WALL MOUNT:
IceQube air conditioning systems have
been designed to be light weight for ease
of installation. Side or vertical mount units
have been designed with a simple “two stud”
alignment feature to make initial fastening to
the caninet quick and easy.
1.
Determine the location of the IceQube
system on the wall mount. The Great Lakes
wall mount comes with a hole pattern that will
accept the a/c unit.
2.
After checking that all openings and bolt
holes are in alignment, apply the provided
gasket material to the IceQube a/c unit.
