manualshive.com logo in svg

Gravely 994149, Руководство оператора

Поделиться
Скачать
Gravely 994149 Скачать руководство пользователя страница 32

EN - 30

Remove Mower Drive Belt

See Figure 36.
1. Remove PTO belt from jackshaft. See 

Remove PTO Belt

 on page 29.

2. Relieve spring tension and remove spring 

from bracket.

3. Remove mower drive belt.

Install Mower Drive Belt

See Figure 36.
1. Install mower drive belt.
2. Verify that there are no twists in belts and 

that they are routed correctly.

3. Reinstall spring to bracket.
4. Reinstall PTO belt. See 

Install PTO Belt

 

on page 29.

Remove Transmission Belt

1. Pull back idler arm and remove 

transmission belt. See Figure 37.

Install Transmission Belt

See Figure 37.
1. Install new transmission belt.
2. Verify that there are no twists in belts and 

that they are routed correctly. 

REMOVE / INSTALL MOWER 

DECK

Remove Deck

1. Place unit in service position. See 

Service Position

 on page 19.

2. Remove PTO belt from clutch. See 

Remove PTO Belt

 on page 29.

NOTICE: 

Position supports such as blocks or 

jack stands under each side of the deck.
3. Slowly lower deck until it rests on 

supports.

4. Remove hardware securing mower lift 

links to the deck. See Figure 38.

5. Remove and retain drag link hardware. 

See Figure 39.

6. Slide deck out from under unit. 

Figure 37

1. Tension Bracket
2. Transmission Belt

1

2

WARNING: 

AVOID INJURY! 

Springs store energy. Keep 

body parts well away from 

pinch points when removing the 

deck.

WARNING: 

AVOID INJURY. 

Mower lift arms and lift pedal 

could cause severe injury if the 

lift-assist springs are not 

disconnected before the lift 

links.

Figure 38

3

2

1

1. Mower Lift Arm
2. Mower Lift Link
3. Mounting Hardware

Содержание 994149













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды