Gravely 994149 Скачать руководство пользователя страница 10

EN - 8

Always use ramps to climb curbs to prevent 
personal injury or equipment damage.
Use care when approaching blind corners, 
shrubs, trees or other objects that may 
obscure vision.
Dust, smoke, fog, etc. can reduce vision and 
cause an accident. 
Only operate in good light, keeping away 
from holes and hidden hazards.

Slope Operation

Slopes are a major factor related to loss of 
control and tip-over accidents, which can 
result in severe injury or death. Operation on 
all slopes requires extra caution. If you 
cannot back up the slope or if you feel 
uneasy on it, do not mow it.
DO NOT operate on slopes of more than 
20°. This maximum degree of operation is 
without attachments. 
Do not operate on slopes of more than 10° 
with attachments such as grass catchers 
installed.
Mow across slopes, not up and down.
DO NOT operate the mower on slopes at all 
when the grass is wet.
DO NOT operate on slopes steeper than 
you can feel secure about the traction of the 
tires and the stability of the mower.
Watch for holes, ruts, bumps, rocks, or other 
hidden objects. Uneven terrain could 
overturn the machine. Tall grass can hide 
obstacles.
Do not mow on moist or wet grass. Tires 
may lose traction causing a loss of control.
Use extra care while operating machine with 
grass catchers or other attachments; they 
can affect the stability of the machine. Do 
not use on steep slopes.
Slow down and use caution when making 
turns and when changing directions on 
slopes. Keep all movements on the slope 

slow

 and 

gradual

. Sudden changes in speed 

or direction could cause the machine to roll 
over.
Avoid starting, stopping, or turning on a 
slope. If the tires lose traction, disengage 
the blade(s) and proceed slowly straight 
down the slope.

Operation on slopes may lead to loss of 
steering control. When operating on slopes 
be prepared to react to an emergency 
situation:
• Return steering levers to neutral position.
• Immediately set parking brake.
• Turn off PTO and engine.
DO NOT try to stabilize the machine by 
putting your foot on the ground.
DO NOT park on slopes unless necessary. 
When parking on slope always chock or 
block wheels. Always set parking brake.
Choose a low ground speed so you will not 
have to stop or shift while on a slope.
Slow down and use extra care on hillsides. 
Be sure to travel in the recommended 
direction on hillsides. Turf conditions can 
affect the machine’s stability. Use caution 
while operating near drop-offs.
DO NOT operate near drop-offs, ditches, or 
embankments. Unit can suddenly turn over if 
a wheel is over the edge of a cliff or ditch, or 
if an edge caves in.
Do not bypass transmission or allow 
transmission to free-wheel when on a slope. 

Fuel

To avoid personal injury or property damage, 
use extreme care in handling gasoline. 
Gasoline is extremely flammable and the 
vapors are explosive.
Ethanol blends must not exceed E10. Higher 
ethanol content may cause your 
machine to run hotter and damage your 
engine.
Replace fuel cap securely and clean up 
spilled fuel before starting engine.
Extinguish all cigarettes, cigars, pipes, and 
other sources of ignition.
Use only an approved fuel container.
Never store the machine or fuel container 
where there is an open flame, spark, or pilot 
light such as on a water or space heater or 
other appliances.
Never fill containers inside a vehicle or on a 
truck or trailer bed with a plastic liner. 
Always place containers on the ground away 
from your vehicle before filling.
Never refuel the machine indoors.
Never remove fuel cap or add fuel with the 
engine running. Allow engine to cool before 
refueling.

Содержание 994149













































Отзывы: