Gravely 994149 Скачать руководство пользователя страница 26

Страница: 26 / 44

EN - 24

See Figure 23.
4. Remove hold-down bracket.
5. Remove battery.

Clean Battery

1. Clean terminals and battery cable ends

with wire brush.

2. Coat terminals with dielectric grease or

petroleum jelly.

Install Battery

1. Install battery.
2. Secure hold-down bracket to battery

using original hardware.

3. Reconnect positive cable and then the

negative cable.

4. Place boot over positive terminal.
5. Reinstall access panel and secure with

wing knobs.

CHARGE BATTERY

NOTICE:

DO NOT fast charge. Charging at a

higher rate damages or destroys battery.
ONLY use an automatic charger designed for
use with your battery.

NOTICE:

ALWAYS follow information

provided on battery by battery manufacturer.
Contact battery manufacturer for details
regarding charge.
1. Remove battery from unit. See

Remove

Battery

on page 23.

2. Place battery on bench or other well-

ventilated place.

3. Connect positive lead of charger to

positive terminal.

4. Connect negative lead of charger to

negative terminal.

5. Charge battery according to charger and

battery manufacturers’ instructions.

6. Reinstall battery. See

Install Battery

page 24.

Jump-Starting

Gravely does not recommend jump-starting
your unit. Jump-starting can damage engine
and electrical system components. See your
engine manual for more detailed information.

CHECK FASTENERS

Check for loose hardware and tighten if
necessary.

LUBRICATE UNIT

1. Apply oil to all pivot points and pin

connections.

2. Pump grease into grease fittings.

Lubricate Caster Fork Bearings

See Figure 24.
1. Place steering levers in neutral position

and engage parking brake.

2. Stop engine, remove key and wait for

moving parts to stop and for hot parts to
cool.

3. Remove dust cap.
4. Pump grease into the fitting until grease

appears at the top of the upper bearing.

5. Reinstall dust cap.

Figure 22

Figure 23

1. Hold-Down Bracket

Содержание 994149













































Результаты поиска

Содержание 994149

Отзывы:

Бренды по названию

Популярные бренды

Gravely 994149, Руководство оператора

Результаты поиска

Содержание 994149

Отзывы:

Бренды по названию

Популярные бренды