Gravely 991128 Скачать руководство пользователя

Страница: 7 / 54

EN - 5

Look behind when operating
the unit in reverse.

1.6 Loss of Traction Hazard

If loss of traction is
experienced do the
following:

Disengage PTO.

Look before backing.
Proceed off slope slowly.

DO NOT try to turn or speed
up.

2. DANGER!

Discharge Hazard – NEVER
operate unit without
discharge chute in operating
position. Thrown objects can
cause injury or damage.

DO NOT operate mower
unless all guards are in
operating position or bagger
is attached.

3. DANGER!

Discharge Hazard – NEVER
direct discharge toward
people, pets or property.
Thrown objects can cause
injury or damage.

Amputation Hazard –
NEVER stick hands or feet
under deck or shielded
areas.

Stop engine, remove key,
and read manual before
servicing or making
adjustments to unit.

Keep children and others
away from unit while unit is
in operation.

Keep hands and away from
all rotating or moving parts.

DO NOT step or stand in
this area.

4. DANGER!

Discharge Hazard – NEVER
operate unit without
discharge chute in operating
position. Thrown objects can
cause injury or damage.

DO NOT operate mower
unless all guards are in
operating position or bagger
is attached.

Содержание 991128























































Результаты поиска

Содержание 991128

Отзывы:

Похожие инструкции для 991128

Бренды по названию

Популярные бренды

Gravely 991128, Руководство оператора

Результаты поиска

Содержание 991128

Отзывы:

Похожие инструкции для 991128

Бренды по названию

Популярные бренды