Gravely 991128 Скачать руководство пользователя

Страница: 6 / 54

EN - 4

Safety Decal Descriptions

1. DANGER!

DANGER!

Read Operator’s Manual.

1.1 Amputation Hazard

To avoid amputation hazard,
DO NOT put hands near
rotating blades.

To avoid amputation hazard,
DO NOT put hands near
moving belts.

Keep hands away from all
rotating or moving parts.

Keep all guards and shields
in place.

1.2 Discharge Hazard

NEVER direct discharge
toward people, pets or
property. Thrown objects
can cause injury or damage.

Keep children and others
away from unit while unit is
in operation.

DO NOT operate mower
unless all guards are in
operating position or bagger
is attached.

1.3 Tipping Hazard

Avoid tipping hazard.

DO NOT operate on slopes
over 15°.

1.4 Service Hazard

Before servicing unit, do the
following:

Read Operator’s Manual
before servicing or making
adjustments to unit.

Set parking brake.

Remove key and disconnect
spark plug before servicing
or making adjustments to
unit.

1.5 Bystander Hazard

DO NOT operate the unit in
the presence of bystanders.

DO NOT carry passengers.

Содержание 991128























































Результаты поиска

Содержание 991128

Отзывы:

Похожие инструкции для 991128

Бренды по названию

Популярные бренды

Gravely 991128, Руководство оператора

Результаты поиска

Содержание 991128

Отзывы:

Похожие инструкции для 991128

Бренды по названию

Популярные бренды