Gravely 991128 Скачать руководство пользователя | Manualshive

Страница: 52 / 54

background image

Commercial_2017

EN - 50

Exceptions and Limitations

The chart below details special exceptions to this warranty:

Customer Responsibilities

Register the product immediately at the time of sale.

If the dealer does not register the

product, the customer must complete the product registration card in the literature package and
return it to the Ariens Company, or register the unit online at www.ariens.com,
www.gravely.com, www.countax.com.
To obtain warranty service, the

original purchaser

must:

• Perform the maintenance and adjustments explained in the owner's manual.
• Promptly notify Ariens or an authorized Ariens, Gravely or Countax service representative of

the need for warranty service.

• Transport the product to and from the place of warranty service at owner's expense.
• Have the warranty service performed by an authorized Ariens, Gravely or Countax service

representative.

To Find an Authorized Service Representative:

Exclusions – Items Not Covered by This Warranty

• Parts that are not genuine Ariens, Gravely or Countax service parts are not covered by this

warranty and may void the warranty.

• Damages resulting from the installation or use of any part, accessory, or attachment which is

not approved by the Ariens Company for use with product(s) identified herein are not
covered by this warranty.

• The following maintenance, service and replacement items are not covered by this warranty

unless they are noted in the Limitations section above: lubricants, spark plugs, oil, oil filters,
air filters, fuel filters, brake linings, brake arms, brake shoes, skid shoes, scraper blades,
shear bolts, mower blades, mower vanes, brushes, headlights, light bulbs, knives, cutters.

• Any misuse, alteration, improper assembly, improper adjustment, neglect, or accident which

requires repair is not covered by this warranty.

•

Use of gasoline blends exceeding 10% ethanol voids any and all warranties.

Warranty

Code

Warranty Exception

Warranty

Period

Use

Detail

All

Batteries

1 Year

All

Prorated

All

Belts, Muffler, Tires

None

Commercial

These components are not
covered when used commercially.

All

Cloth, Plastic, and
Rubber Components
(Including Belts and
Cables)

Maximum

2 Year

All

Warranty is limited to 2 years for
consumer use. Except as noted
above, these components are
covered for defect, not for wear.

All

Engines

See Engine

Manufacturer’s

Warranty

All

Engines are covered by engine
manufacturer’s warranty. Refer to
engine manufacturer’s warranty
statement.

In the U.S. and Canada:

Use the dealer locator on our websites: www.ariens.com • www.gravely.com

Or contact us by mail or by phone:

In the U.S., Canada, Mexico,
Caribbean, Central and South
America:

In Europe, Asia, Africa or
the Middle East:

In Australia or New
Zealand:

Ariens Company

655 W. Ryan Street

Brillion, WI 54110

Phone: (920) 756 - 4688

www.ariens.com

Ariens Company Limited

Great Haseley,

Oxford OX44 7PF

United Kingdom

Phone: +44 800 597 7777

www.countax.co.uk

Allpower Industries Pty Ltd

128 Bridge Rd

Keysborough VIC 3173

Australia

Phone: +61 1800 333 428

www.allpower.com.au

«
...
50
51
52
53
54
»

Содержание 991128























































Отзывы:

Нет отзывов

Похожие инструкции для 991128

Бренд: Walker Страницы: 76

Бренд: Toro Страницы: 56

Бренд: Salsco Страницы: 29

MOW'N MACHINE FZ22-2

Бренд: Woods Страницы: 48

Бренд: Gardenline Страницы: 34

Ultra Vac QDS Frontrunner FRCK524

Бренд: Exmark Страницы: 7

Бренд: Qualcast Страницы: 2

Бренд: Snapper Страницы: 4

Бренд: STEELE PRODUCTS Страницы: 23

Landroid WR142E

Бренд: Worx Страницы: 104

Бренд: Hitachi Koki Страницы: 96

Бренд: SaMASZ Страницы: 35

Бренд: Dolmar Страницы: 120

Бренд: Wolf Garten Страницы: 289

Бренд: Honda Страницы: 28

Бренд: Kingcat Страницы: 16

Бренд: sunjoe Страницы: 20

Бренд: ST. SpA Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды