Gravely 991128 Скачать руководство пользователя | Manualshive

Страница: 25 / 54

background image

EN - 23

Proper maintenance can prolong the life of
unit. The

Maintenance Schedule on Page 24

shows the recommended service schedule.
Your Gravely dealer can provide service and
adjustments to keep your unit operating at
peak efficiency. Contact an authorized engine
manufacturer’s service center for engine
service.

More frequent service may be required due to
working conditions (heavy loads, high
ambient temperatures, dusty conditions, or
airborne debris).

See the maintenance instructions in the
Engine Manual for additional information.

SERVICE POSITION

1. Park unit on a flat, level surface.

2. Engage parking brake and rotate steering

levers outward.

3. Stop engine, remove key and wait for

moving parts to stop and for hot parts to
cool.

4. Pull seat latch and rotate seat forward.

5. Chock wheels. Strap and clamp unit onto

lift, if used.

HOUR / MAINTENANCE METER

Timer-only Models

Timer measures engine runtime and cannot
be reset.

Maintenance Models

See Figure 26.
When the key is in the on position, the Timer
mode displays. Press the Mode button to
toggle between different modes.

Timer:

Measures engine runtime until reset.

To reset the timer, press the Mode button to
select TMR1 mode and then hold Mode
button for 3 seconds.

IMPORTANT:

Turn ignition key to the off

position when unit is not in use. Some meters
may count hours when the key is in the on
position, even if the engine is off. This results
in inaccurate maintenance intervals.

Service Alerts:

Counts down hours until

service is needed and displays "Now" when
service is due. Service time is measured for:

• Engine oil and filter changes (CHG OIL)

• Hydraulic oil and filter changes (CHG H

OIL)

• Air filter service (SVC AIRFILTER)

The service intervals preset into the hour
meter are:

• Hydraulic oil and filter: First 75 hours and

every 400 hours thereafter

• Engine oil and filter: First 25 hours and

every 100 hours thereafter

• Air filter: Every 100 hours

NOTICE:

The preset engine oil services

intervals are normal recommended intervals.
Specific engine manufacturer’s
recommendations may vary.

To clear a service message, press the Mode
button to select Service Alert mode and then
hold the Mode button for 3 seconds.

MAINTENANCE

WARNING:

AVOID INJURY.

Read and understand the

Safety

section before proceeding.

CAUTION:

AVOID INJURY.

Seat assembly is heavy. Secure
your footing to accommodate
weight shift when rotating seat
forward.

Figure 25

Figure 26

1. Mode Button

«
...
23
24
25
26
27
...
»

Содержание 991128























































Отзывы:

Нет отзывов

Похожие инструкции для 991128

Бренд: Yard Machines Страницы: 8

Бренд: MTD Страницы: 28

Бренд: Troy-Bilt Страницы: 88

Бренд: Gardenline Страницы: 36

AMBROGIO L60 ELITE

Бренд: ZCS Страницы: 34

Бренд: elem Страницы: 99

SDNSL 108 Hydro

Бренд: Stiga Страницы: 38

Бренд: Baroness Страницы: 87

NZMX30614KH, NZMX32734BV

Бренд: Snapper Страницы: 13

Бренд: Gama Garden Страницы: 19

TH910 Series II

Бренд: Deutscher Страницы: 22

Бренд: Bad Boy Страницы: 48

AutoDrive 60-1827-4

Бренд: Yard Works Страницы: 53

Бренд: Electrolux Страницы: 13

Бренд: Electrolux Страницы: 11

Бренд: Electrolux Страницы: 13

Бренд: Electrolux Страницы: 11

Бренд: Electrolux Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды