GRAUPNER Skalar, Руководство пользователя

Страница: 6 / 59

elektro
Skalar
6
Accessories
Recommended motors and accessories for the elektro Skalar
Motor Speed controller Batteries
COMPACT 555 18,5V
Order No. 7726
COMPACT CONTROL 80
HELI
Order No. 7187
or
COMPACT CONTROL 75S
HELI
Order No. 7207
1 Pcs. LiPo 5/3400, Order No. 7648.5 or LiPo 5/4800, Order No. 7658.5
or
2 Pcs. LiPo 3/3400, Order No. 7648.3 or LiPo 3/4800, Order No. 7658.3
or
1 Pcs. LiPo 5/3400, Order No. 7648.5 or LiPo 5/4800, Order No. 7658.5
and
1 Pcs. LiPo 2/3400, Order No. 7648.2 or LiPo 2/4800, Order No. 7658.2
COMPACT 555 20V
Order No. 7716
COMPACT CONTROL 80
HELI
Order No. 7187
or
COMPACT CONTROL 75S
HELI
Order No. 7207
2
Pcs.
LiPo 4/3400,
Order No.
7648.4
or
LiPo 4/4800,
Order No.
7658.4
or
2 Pcs. LiPo 5/3400, Order No. 7648.5 or LiPo 5/4800, Order No. 7658.5
or
1 Pcs. LiPo 5/3400, Order No. 7648.5 or LiPo 5/4800, Order No. 7658.5
and
1 Pcs. LiPo 4/3400, Order No. 7648.4 or LiPo 4/4800, Order No. 7658.4
COMPACT 655 20V
Order No. 7726
COMPACT CONTROL 80
HELI
Order No. 7187
or
COMPACT CONTROL 75S
HELI
Order No. 7207
2 Pcs. LiPo 5/3400, Order No. 7648.5 or LiPo 5/4800, Order No. 7658.5
Attention : Be sure to combine only battery packs with equal capacity (3400mAh or 4800mAh)!
Suitable main rotor blades
Order No. 1296 GRP, reflex-section, 552 mm long Rotor Ø 1261 mm
Order No. 1269 GRP, symmetrical, 552 mm long Rotor Ø 1261 mm
Order No. 1271 GRP, symmetrical, 602 mm long Rotor Ø 1361 mm (supplied)
Radio control equipment: see main Graupner catalogue
We recommend using a radio control system equipped with special helicopter options, or a
micro-computer radio control system such as the mx-16s, mc-19, mx/mc-22 or mx/mc-24.
As a minimum the radio control system must feature a 3-point swashplate mixer and five
directly connected servos for the functions pitch-axis, roll, collective pitch, tail rotor and
motor.
Servos : the model should only be flown with high-performance servos, e.g. C 4041, Order No.
3916, or servos of at least comparable performance.
Gyro system :
SRVS Gyro-System G490T, Order No. 5137 or
SRVS Gyro-System G770T, Order No. 5959 or
SRVS Gyro-System G7000T, Order No. 5956 or
SRVS Gyro-System G8000T, Order No. 5957
with
Super-Servo DS-8700G, Order No. 5156 or
Super-Servo DS-8900G, Order No. 5182 or
Super-Servo DS-8100G, Order No. 5153
Receiver power supply:
For safety reasons it is essential to use a pack of at least 1000 mAh capacity, together with a
switch harness with adequate cable cross-section for the high currents which will flow.
Do not use a receiver battery with more than 4 cells under any circumstances.
We also recommend a voltage monitor module, Order No. 3138, which allows you to monitor the
voltage of the receiver battery constantly.