GRAUPNER Skalar, Руководство пользователя

Страница: 33 / 59

elektro
Skalar
33
cap screws and M3 self-locking nuts. Position the horizontal stabiliser bracket 200 mm forward
of the tail rotor bracket, and set the horizontal stabiliser at right-angles to the vertical stabiliser.
Tighten the screws firmly.
8. Installing the skid landing gear
(bag SR-4)
Fit the skid tubes 4447.7 through the skid bars 4447.6 and slide them along until the distance
between the fixing screw holes is 207 mm.
The skid landing gear can now be attached to the model using two M3 x 16 socket-head cap
screws at the rear and two M3 x 20 socket-head cap screws at the front; don’t forget to fit the
spacer sleeves 4451.5 at the front as shown. Set the skid tubes exactly parallel to each other,
and slide them through the skid bars until they both project by about 50 mm beyond the rear skid
bars. The skids are fixed to the skid bars using 2.2 x 6.5 mm self-tapping screws fitted from the
inside as shown; drill 1.5 mm Ø pilot-holes through the skid bars and into the skids before fitting
the screws. Epoxy the sealing plugs in the skid tubes.