GRAUPNER Micro Star 400, Руководство пользователя

Страница: 8 / 28

Micro Star 400 v2
8
Connect the pushrods to the output arms of the swashplate, collective pitch and tail rotor
servos.
Important:
The servos must be set to centre (neutral) before fitting the output arms.
This is done by connecting the receiving system components including a receiver battery, then
switching on the transmitter and receiver. Check that all sticks and trims are at centre.
The basic collective pitch setting is established by adjusting the pushrod which runs up through
the main rotor shaft. Loosen the control rocker clamping screw to adjust this setting. Adjust the
pushrod so that the pitch angle of the blades is 0 … 3° when the servo is at centre and the
rocker is horizontal.