GRAUPNER Micro Star 400, Руководство пользователя

Страница: 22 / 28

Micro Star 400 v2
22
Only the bottom section of the tail boom support is used to fix the tail boom to the chassis in this
version; it is fitted on top of the boom, while the bottom of the boom rests directly on the chas-
sis; this places the drive shaft in the correct position relative to the motor pinion.
Note:
The tail boom is located lower in the chassis than with the toothed-belt version, with the result
that the crown gear only engages with the top of the motor pinion:
Fit the shaft 4441.444 (with bevel gear) in the tail rotor gearbox instead of the shaft 4441.344
(with toothed belt pulley).