Micro Star 400 v2
2
Foreword
The MICRO STAR 400 v2 is a miniature electric-powered helicopter which boasts all the per-
formance and flight handling characteristics of much larger models. It is controlled using collec-
tive pitch and a Bell / Hiller main rotor mixer linkage, i.e. we have not adopted any compromises
which would have an adverse effect on flight control. The result is that the MICRO STAR 400 v2
can be flown without problem even in quite strong winds, in spite of its diminutive size.
The potential flight time per battery charge naturally varies according to the model’s set-up and
the pilot’s flying style; our experience shows that around 15 minutes duration is possible under
normal conditions if the recommended LiPo battery is used.
The control functions roll, pitch-axis and collective pitch are mixed mechanically, which means
that the model can be flown using a simple four-function radio control system; motor speed con-
trol and collective pitch are coupled together using a Y-lead. Nevertheless, a transmitter with
special helicopter options (mc-12 … mc-24) obviously offers certain advantages.
The model’s strong, lightweight chassis consists of nylon components, while the tail boom and
skids are made of eloxided aluminium; the boom braces are of carbon fibre.
The motor drives the main rotor by means of a single-stage gearbox with an integral auto-rota-
tion freewheel - by no means a standard feature in a model of this size.
The model is available in two versions which differ only in the tail rotor drive system: the tail
rotor is either driven directly by the motor via a ballraced carbon fibre shaft, or by a toothed belt.
Note:
the version with belt-driven tail rotor is not suitable for installation in enclosed fuselages
such as the "A119 KOALA", Order No. 4461.
The MICRO STAR 400 v2 is supplied in a carry-case with handle; the case can be used subse-
quently to store and transport the model in ready-to-fly form (with the main rotor blades re-
moved).
Specification
Length excl. rotor approx.
580 mm
Height approx.
205 mm
Width excl. rotor approx.
90 mm
Main rotor Ø
630 mm
Tail rotor Ø
140 mm
All-up weight min. approx.
520 g
Main rotor reduction ratio
13.2:1
Tail rotor reduction ratio
4:1
Содержание Micro Star 400
Страница 28: ...Micro Star 400 v2 4 Notes...
