GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved! No liability for printing errors!
10/2011
- 7 -
Use UHU ALL PURPOSE ADHESIVE Power to glue in the rudder hinges of the
tailplane and vertical stabilisers in accordance with the method already described.
Use a geometric protractor and overhead marker to exactly mark the midline of the
tailplane; then area to be glued to the fuselage. Use the hot tip of a soldering gun to
cut through the covering sheet, and pull it off.
Slide the tailplane into the fuselage exactly centred and glue it from the inside as
shown. For the lowest rudder hinge of the rudder cut a slit in the fuselage; then push
on the vertical stabiliser as well. First try this procedure without any adhesive. Above
all, make sure you do not use activator for the gluing process.
