GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved! No liability for printing errors!
10/2011
- 10 -
The figure shows the completed wheel with cover, which is now firmly connected to
the undercarriage strut by means of washer and M 3 nut. Align the two wheel covers
exactly. When everything fits, secure the connections with adhesive. Caution: Do not
get any adhesive on the wheel hub.
The figure shows the completely assembled and attached undercarriage, which is
screwed on with three M 3 screws, including locking rings. Do not remove the
covering sheet to do this; just puncture it for the screws.
Put the fuselage fairing in place, glue in the pilot, and glue on the cockpit canopy with
UHU ALL PURPOSE ADHESIVE Power, hold in place with tape.
Note: If you value particularly agile flight characteristics, you can do without the bust
of the pilot in order to save about 30 g in all-up weight.
