GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors 11/2010
6
Fit short pieces of heat-shrink sleeve over the landing flap hinges to prevent the jaws
opening.
Use your fingertips to locate the holes for the aileron horns, and melt the covering
film over them using the tip of a hot soldering iron.
Place the threaded socket in the hole, and remove a disc of film the same size as the
base flange. Assemble the threaded socket, the cheesehead screw, the horn lug and
the nut as shown in the photo. Repeat for the second aileron.
Connect the appropriate extension leads to the aileron and flap servos, and fit heat-
shrink sleeves round the connections to prevent them working loose; alternatively a
drop of cyano can be used. Set the servos to centre from the transmitter before fitting
the output levers on the servo output shafts.
