GRAUPNER HoTT General Engine-Module 2-6 S, Руководство пользователя

Страница: 6 / 24

5.3. Sensor 1 - 2 Temperature
Parameter Description Setup
Sensor 1 Current temperature of sensor 1 connected to socket 5 -
Min./Max. Minimum/Maximum temperature of sensor 1 connected to socket
5 since the start
-
Sensor 2 Current temperature of sensor 2 connected to socket 7 -
Min./Max. Minimum/Maximum temperature of sensor 2 connected to socket
7 since the start
-
DEC
INC
Sensor 1 : 25°C
Min 20°C
Sensor 2 :
Min 20°C
Max : 60°C
160°C
Max : 260°C
5.4. Rev counter
Parameter Description Setup
RPM (2 blade) Current motor speed in revolutions per minute and the preset
blade number
-
Max. Maximum RPM since the start -
Min. Minimum RPM since the start -
With connected speed sensor, the current engine rpm is determi-
ned. Therefore, you must
fi rst specify how many blades (or mag-
nets with sensor order no. 33516) the propeller / rotor has to get the
correct rpm. In addition, you can set the minimum engine speed at
which the alarm should be triggered.
See point 7.2. for setup.
RPM (2blade) :
Max. :
Min. :
DEC
7200
16300
3500
INC
Parameter Description Setup
Max. Current Maximum current of the battery connected to socket 1 since
the start
-
Capacity Used capacity of the battery connected to socket 1 since the
start
-
Voltage Current voltage of the battery connected to socket 1 -
05
33610 General Engine-Module - Graupner HoTT 2.4