33610 General Engine-Module - Graupner HoTT 2.4
12
7. SETUP DISPLAYS
7.1. Calibration of the temperature sensors
Go to the User Setup screen of the General Engine-Module as in the diagram shown above. Select the User
Setup display as shown in the diagram. Press the INC and DEC buttons on the SMART-BOX (resp.
SET
)
simultaneously and select User Setup page 2. You can now calibrate the temperature of the sensors 1 and 2
in the range of -10 to +10 ° C to increase the accuracy of the display. To save the settings, go back to page
1 and choose ,Save Sensor‚ YES.
7.2. Select Blade Number:
With connected speed sensor, the current engine rpm is determined.
Therefore, you must
fi
rst specify how many blades (or magnets with
sensor order no. 33516) the propeller / rotor has to get the correct rpm.
In addition, you can set the minimum engine speed at which the alarm
should be triggered.
Blade Number:
adjustable from 1 to 6 blades
General Engine-Module <
>User Setup :
Save to Sensor?
Factory Set?
page 1
No
No
INC + DEC
page 1
No
No
INC + DEC
INC
page 2
30°C
30°C
DEC
General Engine-Module <
>User Setup :
Save Sensor?
Factory Set?
Adjust Temperature
>User Setup :
Sensor1 Temp:
Sensor2 Temp:
INC
page 3
2
DEC
Blade / Magnet Number
>User Setup :
Blade Number :
ESC
ENTER
ESC
General Engine-Module <>
>Set Warning:
Save Sensor?
Factory Set?
Ver: S 1.100
page 1
No
No
LiPo Cell Voltage >
Overall volt
: 11.890V
Min 8.450V
1N 3.201V
3N 3.030V
5N 0.000V
Min 2.567V
Max 16.800V
2N 3.100V
4N 2.567V
6N 0.000V
Max 3.201V
ENTER
ESC
General Engine-Module <
>User Setup :
Save Sensor?
Factory Set?
page 1
No
No
ENTER
