GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors. Id.-Nr. 0062273 3/2011
-
10
-
Fitting the propeller
Install the propeller on the motor as shown in the photo, using a 1.5 mm Ø steel rod
to tighten the spinner. Caution: fit the propeller with the lettering facing forward, i.e.
towards the model’s nose. If you fit it the other way round, motor power will be greatly
reduced.
Decals
It is not necessary to paint the model’s SOLIDPOR® components. If you wish to give
the aircraft a coloured finish, we recommend the use of GRAUPNER LEXACOLOR
spray paints, Order No. 945... Do not rub down the surfaces prior to painting; instead
wipe them with cellulose thinners, Order No. 1409, and a piece of absorbent paper
towel.
Cut out and apply the decals from the decal sheet (28) to complete the model.
