GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Changes reserved! No liability for printing errors ID. no. 0063067 07/2012
6
The screw must be secured against loosening with UHU thread-lock.
For the assembly of the tail wheel and the rudder servo, the recess at the hull end
must be cut out and filed down to match the tail wheel.
Adhere the fin end and rudder servo board together.
Extend the rudder servo connection cable with the appropriate extension cable.
Secure the plug connection against loosening. Using rubber bushes, rivets and the
accompanying screws, fasten the servo to the board.
Attach the rudder linkage to the servo lever as shown in the photo.
Now the fin end can be adhered. In the process, make sure that it is recessed from
the edge approx. 13 mm at the bottom and approx. 11 mm at the top.
