GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Changes reserved! No liability for printing errors ID. no. 0063067 07/2012
20
Prior to every flight, check the entire RC system as well as the model aircraft
for full functionality and range.
Switch the transmitter on first and then the receiver system. In reverse order
upon shutdown, be sure to switch off the receiver first and only then switch
off the transmitter.
Check that the aircraft's control surfaces move in the directions they should
with respect to movement of the joystick.
After use, take all batteries out of the model and store it only in a discharged
state (approx. 0.9 V per cell), out of the reach of children, in an environment
having a temperature of between about + 5 C to + 25 C.
These notices are intended to call attention to the diverse hazards that can
arise from improper and irresponsible handling. Proper, conscientious model
aircraft flight is a creative, enlightening, refreshing recreational activity.
Notices for the construction of and flying with ASH 31 MI
Before the construction is begun:
RC parts and rudder linkages are installed during the assembly in accordance with
the construction stages. Installation at a later time is only possible with great difficult
or is not possible at all.
When purchasing a remote control system, be sure its transmitter and receiver are
suitable for aircraft models, that they are certified by telecommunications
authorities and that they have a test certification number.
The frequency bands allocated to remote control are also used by other types of
radio transmissions and high frequency devices. Therefore no protection against
interference can be guaranteed for devices using these frequency bands.
For
additional
information
on
this
topic,
please
contact
your
local
telecommunications authorities or your model building specialist dealer.
During the construction phase
Observe the safety and handling instructions of the manufacturer when working with
adhesives and solvents. Some adhesives and solvents can cause harm to the health
and material damage if they are not used properly. Return any remaining adhesive
and paint to your specialist dealer or drop it off at a waste disposal center.
Be aware that the balsa knife is sharp and pins are pointy and can easily cause
injuries.
Make sure that children do not have access to tools, adhesives or paints.
A generously sized work surface is very advantageous for all types of handicraft
work.
Enlist the help of experienced model builders for difficult steps
if you have little experience in model construction.
About the flight
Never fly the ASH 31 MI in nature reserves or landscape protection areas. Have
consideration for the animals and plants living there.
Trees and bushes are places where birds breed, nest and live.
