GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors.
3/2013
-
5
-
Carefully sand the top of the fuselage using a sanding block before gluing the top
decking panels (10) in place. Temporarily fit the “snake” outer sleeves (11) and trim
the exit slots if necessary. Fit an inner tube in each sleeve to check that they move
smoothly. When you are satisfied, glue the snake outers to the fuselage using UHU
ALLESKLEBER Kraft or cyano.
The sketch shows the bottom fuselage panels (12) to (14) glued in place; sand the
underside using a sanding block beforehand, as described earlier.
