GRAUPNER 9547, Инструкция по сборке

Страница: 12 / 14

GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors. 3/2013
- 12 -
No. Description Quant. Material Dimensions in mm
61 Rib 2 Balsa Laser-cut, 2
62 Rib 2 Balsa Laser-cut, 2
63 Rib 2 Balsa Laser-cut, 2
64 Rib 2 Balsa Laser-cut, 2
65 Rib 2 Balsa Laser-cut, 2
66 Rib 2 Balsa Laser-cut, 2
67 Spar web 18 Balsa 37 x 7 x 3
68 Dihedral brace 2 x 1+1 Plywood Laser-cut, 2
69 Dihedral brace 4 Plywood Laser-cut, 2
70 Rib 4 Balsa Laser-cut, 2
71 Half-rib 2 Balsa Laser-cut, 2
72 Gusset 6 Balsa Laser-cut, 3
73 Gusset 2 Balsa Laser-cut, 3
74 Incidence peg 2 Hardwood Overlength, 4 Ø x 85
75 Sheet panel 2 Balsa 615 x 85 x 1.5
76 Sheet panel 2 Balsa 390 x 85 x 1.5
77 Sheet panel 4 Balsa Laser-cut, 1.5
78 Sheet panel 2 Balsa Laser-cut, 1.5
79 Tip block 2 Balsa 10, length as plan
80 Root facing rib 2 Plywood Laser-cut, 2
81 Trailing edge reinforcement 2 Steel rod 1.5 Ø x 60
82 Wing joiner rod 1 Steel Ready made, 4 Ø
83 Snake inner tube 2 Plastic Overlength, 1.85 / 0.9 Ø
84 Threaded coupler 4 Plated brass Ready made, M 2
85 Nut 4 Steel Ready made, M 2
86 Clevis 4 Steel Ready made, M 2
87 Control surface horn 1 Plastic Ready made
88 Control surface horn 1 Plastic Ready made
89 Spreader plate 2 Plastic Ready made
90 Pan-head screw 4 Steel M2 x 10
91 Hinge tape (not included) 2 Plastic 620 x 15 x 0.1
92 Countersunk screw 1 Plastic M4 x 20
93 Spreader plate 1 Plastic Ready made
94 Towhook 1 Plastic Ready made
95 Spreader plate 1 Plastic Ready made
96 Pan-head screw 2 Steel M3 x 28
97 Reinforcement 1 Plywood Laser-cut, 3
98 Angle template 2 Plywood Laser-cut, 2
99 Rubber band 4 Rubber 40 Ø x 4 x 2
100 AMIGO IV name placard 4 Self-adhesive film 380 x 140 x 0.1
The picture shows the finished airframe in its uncovered state.