Grasslin thermio eco b1, Руководство по эксплуатации

Страница: 21 / 56

3.
When selecting the installation position, make sure that a distance of at
least 4 cm is left free below the mounting plate to leave space to open
the cover and undo the safety screw.
Mark the hole pattern from the mounting plate (Fig. 5/2) onto the wall.
4. Drill holes at the points you marked.
5. Insert suitable wall-plugs for the screws into the holes.
6. Connection wires directly out of the wall: Thread the connection wire into the device through the
cable feed-through (Fig. 5/3).
7. On-wall connection wires: Break out the necessary defined breaking point (Fig. 5/6) and thread
through the connection wires.
EN
21