7-002 Mounting the Index Stops Illustration 7-002-01
Index stops are included for 5 drawer widths in the standard equipment of the machine. If more than 5 drawer
widths are necessary, additional index stops may be mounted.
Necessary tools:
6 mm Allen key wrench
4 mm Allen key wrench
- Loosen both M8 Allen screws „1“ with the 6 mm Allen key wrench.
- Move the bumper bar „2“ towards the right (seen from behind).
- Tighten both M8 Allen screws „1“ with the 6 mm Allen key wrench.
7-003 Setting the Drawer Width
Illustration 7-003-01, 02
Setting the drawer width from the most narrow width to the widest width.
Necessary tool:
4 mm Allen key wrench
- Lift up the index pin „4“. Move the right unit carrier „5“ until the index pin „4“ engages in the outermost left in-
dex stop „6“. Release the index pin „4“.
- Loosen the fixing screw „7“ with a 4 mm Allen key wrench at the outermost left index stop.
- Move the complete right unit carrier „5“ , until the distance „A“ corresponds with the approximate bottom
width. „A“ = the distance from the left edge of the left change-over insert to the right edge of the right
change-over insert.
- Tighten the fixing screw „7“ with the 4 mm Allen key wrench.
- Open both toggle levers by pressing outwardly.
- Place a drawer bottom on both front supports.
- Place the Zargen slide on the left side ( right Zargen ).
- Place the Zargen slide on the right side ( left side ).
- Close the left unit by moving the toggle lever inward.
- Close the right unit by moving the toggle lever inward until some noticeable resistance is met.
- Loosen the fixing screw „7“ in the index stop „6“.
- Move the toggle lever to the stop.
- Forcefully press the whole unit carrier left against the closed left unit, against the drawer bottom and against
both inserted Zarge slides.
- Tighten the fixing screw „7“ in the index stop „6“.
After the resulting setting, the Zargen slides with the closed units must be able to be moved easily without
a lot of effort and should, if at all possible, have no lateral play in the lengthwise direction. Too much play
or too little room for the Zargen could lead to a jam and could, thus, result in damages.
All other drawer widths are set with the same guidelines; only the index stops are set corresponding to the
width desired.
7. OPERATING THE ZPM
The star in your cabinet
25
Содержание ZPM
