GRASS VALLEY LDX Elite, Руководство пользователя

Страница: 71 / 128

LDX Series Software Upgradable Camera Platform User’s Guide (v3.1) 71
Chapter 5 - Video setup
• FL60 - memory position for 60 Hz fluorescent light (matrix is set to CoolFL and exposure
to 60 Hz )
• AW1 - Auto White memory position 1
• AW2 - Auto White memory position 2
and one automatic continuous white position:
• AWC - Auto White Continuous measurement (from 2500 K to 20000 K)
☞
Note
☞
Note
If AWC is selected, the non-standard indicator in the viewfinder lights (only for ocular
viewfinders).
When the switch is first pressed, the viewfinder displays the current value. Select a new value
by scrolling up or down through the available values.
The viewfinder also displays the actual value of a measured color temperature. The range of
the auto-white balance is from 2500 K to 20000 K.
5.8.5 Variable color temperature
The color temperature switch on the left-front side of the camera can also be used to vary the
color temperature continuously between its minimum and maximum value (2500 K to
20000 K).
1. Hold the switch continuously in the up or down position until you see the value in the
viewfinder change.
2. Release the switch when you reach the value you want. This exits the value selection
mode.
3. Using the switch momentarily again sets the color temperature to the nearest standard
value.