GRASS VALLEY LDX Elite, Руководство пользователя

Страница: 37 / 128

LDX Series Software Upgradable Camera Platform User’s Guide (v3.1) 37
Chapter 4 - Operating instructions
The
MAIN
menu screen shows five items. The name of the menu is shown below these. More
items are hidden but become visible when you scroll down using the rotary control. The
cursor shows your position in the menu. The rotary control moves the cursor up and down.
4.4.2 Finding your way
Use the rotary control to move the cursor through the menu items. If a double arrow (>>) is
visible, then pressing the select button brings you one level lower in the menu system. Only
five items are visible in each menu. Scroll up or down to see any additional items. When you
first enter a menu (other than the
MAIN
menu) the cursor is positioned next to the first item.
Press the back button to go back to the menu that you were in before the current one. The
cursor is positioned next to the last menu.
You can also use the
TOP
and
PREVIOUS
items to navigate. These items are not immediately
visible but are located above the first item. Use the rotary control to scroll up to them.
• Select
TOP
to bring you back to the
MAIN
menu.
• Select
PREVIOUS
to go back to the menu that you were in before the current one.
The
PRODUCTION SETUP
menu, for example, shows the items displayed when you first enter
the menu. The other items are available by scrolling up or down with the rotary control.
4.4.3 Leaving the camera menu
If you are deep within the menu structure, the recommended way of leaving the menu is to
press the
back button a number of times until the menu is abandoned. You can also navigate to
leave the menu:
1. If necessary move the cursor to the left column with the select or back button.
2. Scroll upwards with the rotary control until the cursor points to
TOP
(this is the
MAIN
menu).
3. Press the select button. The cursor now points to the
MENU OFF
item of the
MAIN
menu.
4. Press the select button again to leave the camera menu.
If you do not use the menu it disappears after a few seconds. This delay can be programmed in
the
OPERATOR TOOLBOX
menu. You can also press and hold the or back button for 2 seconds
to make the menu disappear.
When you press the select button again you enter the camera menu at the last position of the
cursor and not at the top of
MAIN
menu.
Levels
Exposure
Color
Image Control
Files
Production Setup
>>
>>
>>
>>
>>
Video Mode
Sensitivity 720p50
Nom
TOP
PREVIOUS