GRASS VALLEY LDX Elite, Руководство пользователя

Страница: 62 / 128

62 LDX Series Software Upgradable Camera Platform User’s Guide (v3.1)
Chapter 5 - Video setup
☞
Note
☞
Note
When Gain is set to negative values, or values higher than 3 dB, the gain indicator in the
viewfinder lights (only for ocular viewfinders).
The gain switch can also be used to vary the gain continuously between its minimum and
maximum value.
1. Hold the switch continuously in the up or down position until you see the value in the
viewfinder change in steps of 0.1 dB.
2. Release the switch when you reached the value you want. This exits the value selection
mode.
3. Using the switch momentarily again sets the gain to the nearest preset value.
☞
Note
☞
Note
Selecting high gain levels may introduce more noise into the image.
5.3 Gamma
5.3.1 Gamma correction
To compensate for the non-linear response of display devices, a gamma correction is applied to
the video signal. The gamma correction adjusts the tonal response of the standard transfer
curve.
5.3.2 Gamma curve
The gamma curve defines the distribution of tonal values. The following standard gamma
curves are available: ITU709 (default), BBC04, BBC05 and BBC06, ARD, Gamma-J and
Gamma-S.
Press the GAMMA button and select
GAMMA CRV
to select the gamma curve you want to use.
0 20 40 60 80 100
0
20
40
60
80
100
γ
= 1.00 (Master Gamma=0)
γ
= 0.35 (Master Gamma=100)
OCP