GRASS VALLEY Kudos Pro LC4000 Скачать руководство пользователя страница 76

Страница: 76 / 83

RollCall Control Panel

RollTrack

• The third set,

, is the slot number in the unit.

• The fourth set,

, is a user-definable number that is a unique identifier for the destination

unit in a multi-unit system. This ensures only the correct unit will respond to the command.
If left at

, an incorrectly fitted unit may respond inappropriately.

RollTrack Command

This item enables a command to be sent to the selected destination unit.

The command may be changed by typing a code in to the text field, and then selecting

save the selection. Clicking

returns to the default preset command.

A RollTrack command consists of two sets of numbers, for example:

84:156

• The first number,

, is the actual RollTrack command.

• The second number,

156

, is the value sent with the RollTrack command.

RollTrack Sending

A message is displayed here when the unit is actively sending a RollTrack command. Possible
messages are:

RollTrack Status

A message is displayed here to indicate the status of the currently selected RollTrack index.
Possible RollTrack Status messages are:

Log Field

Description

The message is not being sent.

Yes

The message is being sent.

Log Field

Description

RollTrack message was sent and received successfully.

Unknown

RollTrack message has been sent but transmission has not yet
completed.

Timeout

RollTrack message has been sent but acknowledgment not received.
This could be because the destination unit is not at the location
specified.

Bad

RollTrack message has not been correctly acknowledged at the
destination unit. This could be because the destination unit is not of
the type specified.

Disabled

RollTrack sending is disabled.

Содержание Kudos Pro LC4000




















































































Результаты поиска

Содержание Kudos Pro LC4000

Отзывы:

Похожие инструкции для Kudos Pro LC4000

Бренды по названию

Популярные бренды

GRASS VALLEY Kudos Pro LC4000, Руководство пользователя

Результаты поиска

Содержание Kudos Pro LC4000

Отзывы:

Похожие инструкции для Kudos Pro LC4000

Бренды по названию

Популярные бренды