GRASS VALLEY KMV-3901, Инструкция по установке и обслуживанию, Страница: 89 / 138

89
KMV-3901/KMV-3911
Installation & Service Manual
Setting the System Name
Once you have configured the output cards from the local control panel, use XAdmin to
complete your system’s network setup.
To set your KMV-3901/3911 system name
1 Open a Web browser window and enter the multiviewer’s system IP address in the
address bar (see Verifying the Multiviewer’s IP Address and Application Version , on
page 104, if needed).
2 The Kaleido multiviewer’s home page appears.
3 Click the XAdmin button.
4 If you see a security warning, or a certificate error message, then see Registering your
Multiviewer's Security Credentials with your Browser , on page 57.
5 If the “Log in to XAdmin” page appears, type the password, and then click Log in .
6 Internet Explorer users: If a blank page appears, then see Enabling the Compatibility
View in Internet Explorer , on page 66.
The XAdmin Status and Options page appears.
7 Click System configuration , in the navigation area on the left of the page.
The System Configuration page appears, showing the current system name,
IP addresses, network mask, default gateway, connection-speed and duplex-mode