GRASS VALLEY JUPITER CONTROL PANEL L32 -, Инструкция по эксплуатации

Страница: 194 / 216

194 JUPITER L-S and LCD Series Control Panel Instruction Manual
Appendix C — GPI/O
3. Select the Source from the Index drop-down list, see Figure 107 .
Figure 107. The Source for the GPO
4. Enter the amount of time, in milliseconds, that you want the contact
closure to stay closed in the Pulse Width field (
Figure 109 ).
Note The time entered must be between 10 and 5000 milliseconds.
Figure 108. The Pulse Width Field
5. Click the Save New Settings button at the bottom of the page when you
are finished ( Figure 109 ).
Figure 109. The Save New Settings Button
Note A GPO On setting is similar to the above steps, except you omit the “time”
setting.