GRASS VALLEY GV MATRIX, Руководство пользователя

Страница: 85 / 115

69
GV Matrix
User Manual
1 2 3 4 5 6 7
Icon # Significance
1 Card control status for this XIO-4901:
• Green (REM): Remote control via this iControl service panel.
• Yellow (LOC):
Local control of this card from the GV Matrix’s local control panel.
2 Status of the SDI Inputs:
• Green: Inputs OK.
• Red: At least one input is in error.
3 Status of the SDI Outputs:
• Green: Outputs OK.
• Red: At least one output is in error.
4 Status of the GV Matrix’s frame URS arriving at the XIO-4901:
• Green: URS OK.
• Red: URS fault.
5 Status of the Ethernet connection (via the controller rear panel)
• Green: Ehernet OK
• Red: Ethernet fault.
6 Card health:
• Green: Card OK.
• Red:
Card failure.
7 Processing Mode:
• Green: Normal operation.
• Yellow: Test signal activated on at least one input or output.
When an error is flagged, an error status message will be shown beneath the dashboard
icons. Multiple error messages will cycle in the display.
• You can always check the current status of an icon by mousing over; the status will be
shown in the message area.
Input Configuration - ASI
The Input Config panel provides resources to configure the processing of the nine rear-
panel inputs before they are sent to the IFM-2T fabric module.
If an input has been configured for ASI input using the GV Node Manager , the tab for that
input in the Input Config panel will be labeled ASI IN n (n = 1 through 9).
Note:
ASI input is not supported if the MDX option is enabled for the XIO-
4901 card.
ASI inputs are passed through without processing, so this tab only allows you to assign a
name to the input, and reports the status of the detected format at the input.
To assign a name to an input
1 Click Input Config and select an ASI IN tab.