GRASS VALLEY GV MATRIX, Руководство пользователя

Страница: 99 / 115

83
GV Matrix
User Manual
2 For each line in the Status/Name column:
a Click on the icon in the Overall Alarm column
b Click to select the appropriate alarm status from the drop-down list
c Click on the icon in the GSM Contribution column
d Click to select the appropriate alarm status from the drop-down list
Shortcut: if you click on “Set All” at the top of one of these columns, you will open a
pulldown list that lets you assign a level to all alarms in that column simultaneously.
e Click on an icon in the Card LED column
You may find that some of these alarms have been hard-wired to a specific level, or
can only be reset using the Set All pulldown
f Click to select the appropriate alarm status from the drop-down list, if available.
3 Click OK to accept the settings and close the window, Apply to accept the settings and
keep the window open, or Cancel to discard the changes and close the window.
See Alarm Configuration on page 84 for a more detailed description of the contents of this
panel.
GV Node Manager
The GV Node Manager manages inputs and outputs between the IFM-2T fabric module
and the modular cards in the GV Matrix’s 16 slots.
To manage the inputs and outputs between the Fabric Module and the modular cards
1 In iControl Navigator, locate the GV Node Manager associated with your GV Matrix and
double-click its icon.
The GV Matrix’s GV Node Manager panel opens.
Note:
In the presence of multiple GV Node managers, locate yours by
checking the Comments column—the DNAME you chose for your GV Matrix
will be the last element in the comment. See
step 5 on page 12 under
Registering your GV Matrix to iControl.
Note:
Depending on the version of GV Node Manager that is installed with
your GV Matrix, certain elements may or may not be present:
• A
Testing tab at the top of the table
• References to Aggregation Ports and stream formats at the bottom of the
table
All of these are inactive for GV Matrix, and should be ignored.