GRASS VALLEY GV MATRIX, Руководство пользователя

Страница: 98 / 115

82
Configuring Your GV Matrix
Alarms
If the box is not checked , the current card settings will remain unchanged .
3 Click Load Factory
The Load Factory Settings Confirmation window opens.
4 Click OK to restore the factory settings, or Cancel to leave the settings unchanged.
Alarms
The XIO-4901 generates alarms that are sent to the GV Matrix controller card when error
conditions are detected. These alarms are used to set the control panel status display, and
the status icon in the top left of the iControl window.
The alarms are reported to the iControl network, and can be reported locally on the frame’s
GPI port.
GPI reporting can only be accessed from the menu, as described at the end of this section
(page 32).
To configure the alarms
1 Click Alarm Config .
The Alarm Configuration panel opens in a new window, and can be resized if needed. It
allows the alarm reporting of the module to be configured. The panel is organized in
columns.